Using The Parrot Mki9200 For The 1St Time - Parrot MKi9200 User Manual

Using the Parrot MKi9200 for the
1st time
Navigating
through the
menus
Adjusting the
menu volume
Pairing and
connecting a
phone / PDA
via Bluetooth
.
If the remote control doesn't seem to be associated
to the electronic box while using the Parrot
MKi9200, hold down the ,
seconds.
the car kit's ignition.
Press the central jog wheel to access the menus.
> The kit says the name of the current menu.
Browse through the menus by turning the wheel
and confirm with the
the scroll wheel.
To exit the menu, press the
few seconds.
To adjust the volume of the Parrot MKi9200, press
the jog wheel and select
.
Volume Use the jog wheel to adjust the desired
volume then validate.
The Audio menu also allows you to deactivate
the vocal menus. For further information, refer
to the Modifying the audio settings section.
Prior to using your Parrot MKi9200 with your phone
for the very first time, you must initially pair
both devices. The pairing process is only required
once.
1. Make sure the Parrot MKi9200 is set so that it
is visible by all Bluetooth ® devices. To do
so, press the jog wheel and select
Bluetooth >Visibility.
option is selected. If it is not the case,
select it by pressing the jog wheel.
The Parrot
default.
2. Press the jog wheel and select
This is only possible during the first 30s after
button or by pressing
Settings > Audio > Menu
MKi9200 is visible
Parrot MKi9200 – User guide
and buttons for 3
button or wait a
Settings >
Then, make sure this
by
Settings >
11