Using The Parrot Mki9200 For The 1St Time; Navigating Through The Menus; Adjusting The Menu Volume; Pairing And Connecting A Phone / Pda Via Bluetooth - Parrot MKi9200 User Manual

All manuals and user guides at all-guides.com
Using the Parrot MKi9200 for the
1st time
Navigating .
through the
menus
Adjusting the To adjust the volume of the Parrot MKi9200, press
the jog wheel and select
menu volume
Volume
volume then validate.
Pairing and Prior to using your Parrot MKi9200 with your phone
for the very first time, you must initially pair
connecting a
both devices. The pairing process is only required
phone / PDA
once.
via Bluetooth
If the remote control doesn't seem to be associated
to the electronic box while using the Parrot
MKi9200, hold down the ,
seconds.
This is only possible during the first 30s after
the car kit's ignition.
•
Press the central jog wheel to access the menus.
> The kit says the name of the current menu.
•
Browse through the menus by turning the wheel
and confirm with the
the scroll wheel.
•
To exit the menu, press the
few seconds.
.
Use the jog wheel to adjust the desired
The Audio menu also allows you to deactivate
the vocal menus. For further information, refer
to the Modifying the audio settings section.
1. Make sure the Parrot MKi9200 is set so that it
is visible by all Bluetooth ® devices. To do
so, press the jog wheel and select
Bluetooth >Visibility.
option is selected. If it is not the case,
select it by pressing the jog wheel.
The Parrot MKi9200
default.
2. Press the jog wheel and select
and buttons for 3
button or by pressing
button or wait a
Settings > Audio > Menu
Settings >
Then, make sure this
is visible by
Settings >
Parrot MKi9200 – User guide
11