Variable-speed rotary tool with flexible shaft (20 pages)
Summary of Contents for Harbor Freight Tools 95329
Page 1
. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353...
Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference. SKU 95329, 95331, 95332, 95333 and 95334 Page 2...
11. Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly SKU 95329, 95331, 95332, 95333 and 95334 Page 3...
It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. SKU 95329, 95331, 95332, 95333 and 95334 Page 4...
Page 5
Adjustable Tool Holder, Bracket Mount, (3) Stop Rings and Allen Key Refer to page 11 for complete parts list. 95334 Axe Sharpening Jig: Adjustable Tool Holder Refer to page 12 for complete parts list. SKU 95329, 95331, 95332, 95333 and 95334 Page 5...
Page 6
These tools are designed to be used with a slow speed wet grinder (not included). Harbor Freight Tools 8” Wet Grinder item number 95236 is used in the photos as an example. The Standard Bracket Unit discussed on page 7 and shown in several photos is included with item 95236.
If not using #95236 8” Wet Grinder, outfit your grinder with a similar bracket set up. Item # 95329 Device for Rough Turning and Hollow Cutting Tools: Insert the chisel or other tool (not included) into the Support Unit as shown in picture above right.
Page 8
Item 95329 with Angle Support In addition to grinding rounded chisels freehand as discussed on the previous page, item #95329 may be used to grind beveled chisels at a preset angle. For grinding beveled flat chisels, assemble this jig as shown in illustration above left.
Page 9
Repeat as necessary. Turn the grinding wheel OFF when finished. Repeat this process with the other blade. Shut off and disconnect from electric supply when finished. Item 95331 Parts List SKU 95329, 95331, 95332, 95333 and 95334 Page 9...
Page 10
Turn the grinder on. Lightly touch the tool on the grinder to sharpen. When the tool is sharp, remove it from the grinder and turn the grinder off. Item 95332 Parts List SKU 95329, 95331, 95332, 95333 and 95334 Page 10...
Page 11
You can rotate your tool on the grinding wheel by turning the rod in the Mounting Bracket. When the tool is sharp, remove it from the grinder and turn the grinder off. Item 95333 Parts List e l l SKU 95329, 95331, 95332, 95333 and 95334 Page 11...
Page 12
Always face tool blade away from your body. When the tool is sharp, remove it from the grinder and turn the grinder off. Item 95334 Parts List SKU 95329, 95331, 95332, 95333 and 95334 Page 12...
LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 95329, 95331, 95332, 95333 and 95334 Page 13...