Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2007 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
18e
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Harbor Freight Tools 40939
Summary of Contents for Harbor Freight Tools 40939
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
-
Page 2: Specifications
READ ALL INSTRUCTIONS BEFORE USING THIS TOOL! KEEP WORK AREA CLEAN. Cluttered areas invite injuries. Item 40939 For technical questions, please call 1-888-866-5797. Page 2... - Page 3 13. AVOID UNINTENTIONAL STARTING. Be sure that you are prepared to begin work before turning the start switch on. 14. STAY ALERT. Watch what you are doing. Do not operate this machine when you are tired. Item 40939 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 17. REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identical replacement parts intended for use with this tool. Replacement parts are available from Harbor Freight Tools. Use of any other parts will void the warranty. 18. PEOPLE WITH PACEMAKERS should consult their physician(s) before use.
-
Page 5: Installation
UNPACKING When unpacking, check to make sure that the is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. INSTALLATION It is important that the machine be located on a hard, solid, level floor. -
Page 6: Electrical Wiring
K1: Electric Power Switch K2: Spindle Rotation Switch K3: Light Switch SA, SB: Safety Switches UL: Switch Coil L1, L2: Motor C: Capacitor TC: Transformer FU: Fuse LB: Light Bulb Item 40939 For technical questions, please call 1-888-866-5797. Page 6... -
Page 7: Adjustment Of Table Gib
The saddle can then be removed. Item 40939 For technical questions, please call 1-888-866-5797. Page 7... - Page 8 120 ; tighten the set bolts after swiveling. The motor and milling head must tilt together since the motor and head are suspended on the same pulley housing. Item 40939 For technical questions, please call 1-888-866-5797. Page 8...
-
Page 9: Please Read The Following Carefully
IYT-1045 Quill micro stop nut IYT- 10M Nut IYT-1041 Quill stopper IYT-1081 6003Z-Bearing IYT- 8Mx20 Screw IYT-1101 A32-Vee belt Bolt washer IYT-1073 1HP, 4 pole-Motor IYT-1014 Draw bar IYT-2006 Column Item 40939 For technical questions, please call 1-888-866-5797. Page 9... - Page 10 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 40939 For technical questions, please call 1-888-866-5797. Page 10...
- Page 11 Item 40939 For technical questions, please call 1-888-866-5797. Page 11...
-
Page 12: Limited 90-Day Warranty
LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does...
Need help?
Do you have a question about the 40939 and is the answer not in the manual?
Questions and answers