DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
1. INTRODUCTION The PRO-HDMIFO-4K is a Transmitter and Receiver set for sending Ultra High Definition 4K HDMI signals over long distances via Fiber Optic cabling. Connect a HDMI source to the Transmitter unit and the uncompressed signal will be passed over fiber optic to the Receiver where it is outputted as HDMI for connection to the display.
5. FEATURES HDMI v1.4, HDCP and DVI compliant Long distance transmission up to 300m with OM3 50/125um cable Fast data transmission FPGA-based solution Supports EDID reading Supports HD resolutions: 480i to 1080i, plus 1080p24/25/30, and 2K x 4K Supplied with Locking PSU High Definition Audio supported: Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LPCM Supports 3D signalsSupports the reading of EDID information...
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Transmitter Front and Rear Panels OPTICAL LINK HDMI IN POWER DC 5V HDMI OPTICAL LINK 1 2 3 POWER LED: This LED will illuminate when connected to an AC wall outlet. OPTICAL LINK LED: The LED will illuminate when the optical cable is connected and has successfully detected and communicated data between the Transmitter and Receiver.
6.2 Receiver Front and Rear Panels OPTICAL LINK HDMI OUT POWER DC 5V HDMI OPTICAL LINK 1 2 3 POWER LED: This LED will illuminate when connected to an AC wall outlet.. OPTICAL LINK LED: The LED will illuminate when the optical cable is connected and has successfully detected and communicated data between the Transmitter and Receiver.
8. CONNECTION AND INSTALLATION DVD or Blu-ray Player HDMI Input Power Supply OPTICAL LINK HDMI IN POWER HDMI LINK DC 5V OPTICAL Fiber Power Optical Supply Cable up to 300m DC 5V OPTICAL OPTICAL LINK HDMI OUT POWER HDMI LINK HDMI Output Display...
Need help?
Do you have a question about the PRO-HDMIFO-4K and is the answer not in the manual?
Questions and answers