Troubleshooting - Bissell 1660 User Manual

Troubleshooting

Weak or no suction / Motor suddenly runs louder /Motor runs hot.
WARNING:
To reduce the risk
of fire, electric
shock or injury
unplug from outlet
before servicing.
Reduced spray or no spray / Leaking connections.
12
Possible Causes
Vacuum is not operating
Collection tank unit is full
Air leak
Dirty filter(s)
Power unit improperly attached
Kink/blockage in hoses/tubes
Reduced spray or no spray / Leaking connections
Possible Causes
Tank siphon tube filter clogged
Filling cavity empty
Spray tip clogged
Tank siphon tube/Solution hose/
Wand solution tube kinked/
disconnected
Pump is not operating
Connections not tight
Remedies
Check electrical plug
Vacuum/switch on?
Call BISSELL Consumer Services
(see page 14)
Empty collection tank
Check all vacuum connections
Secure all latch buttons
See PUTTING IT AWAY,
After Dry Vacuuming, Steps 1-2
(see page 9)
Reposition top power unit on tank unit
Carrying handle in place to lock
tank unit and top power unit?
Straighten hoses/tubes
Check aluminum wands/vacuum
flex hose/solution hose and tube
for obstructions
Remedies
See PUTTING IT AWAY Steps 9-11
(see page 11)
Refill filling cavity
See PUTTING IT AWAY Step 8
(see page 11)
Tighten loose connections
Relax kinks in solution tubes/hoses
Check electrical plug
Pump/spray switch on?
Call BISSELL Consumer Services
( see page 14)
Finger tighten all connections
(do not use pliers or other tools)