Small Areas - Bissell 1660 User Manual

How to clean upholstery and small areas
To clean upholstery, disconnect
wand solution tube and aluminum
wand from grip/trigger unit.
Moisten O-ring at base of cap
valve with soapy water. Align the
Small Area Cleaning Nozzle
with the cap valve and vacuum
tube on grip/trigger unit, then
press latch button on vacuum
tube and slide together until latch
button locks in place.
Tip:
Check upholstery
stuffing before
cleaning.
Colored stuffing
may bleed
through fabric
when wet.
8
Getting ready
1. Disconnect wand solution tube and aluminum wands from
grip/trigger unit.
2. Moisten O-ring at base of cap valve with soapy water.
3. Align small area cleaning nozzle with cap valve and
vacuum tube on grip/trigger unit.
4. Press latch button on vacuum tube and slide small area
cleaning nozzle on until latch button locks in place.
5. Check manufacturer's tag and/or test fabric in an
inconspicuous place.
Cleaning
1. Turn on vacuum/suction and pump/spray switches.
Vacuum/suction switch
2. Depress trigger and pull small area cleaning nozzle
toward you.
3. Release trigger and repeat action to extract excess moisture.
4. Repeat until area is clean.
Pump/spray switch
5. See WHEN YOU'RE DONE, page 7 and PUTTING IT AWAY,
page 11.