Assembly; How To Put It Together - Bissell 1660 User Manual

This User's Guide has been designed to help you
get the utmost satisfaction from your Big Green
Multi-Purpose Deep Cleaner. You'll find assembly
instructions for all cleaning tasks, safety precautions,
pre-cleaning tips, and maintenance and troubleshooting
instructions. Please read this Guide thoroughly before
assembling your Big Green.
Casters. Locate 4 casters inside plastic packaging in
collection tank. Turn tank unit upside down. Insert
four casters and push until they snap into place.
Ball. Place ball on raised area of
recovery tank bottom. [NOTE: Ball
may have an unusual color due to
recycled high density polyethylene
(HDPE) used in its manufacture].
Ball Cage. Position ball cage over
ball and press cage firmly onto
raised area.
Motor Filter. Locate motor filter
and insert it into cavity on the
underside of the top power unit.
Tank Unit. Flip carrying handle
down over filling cavity on tank unit.
Top Power Unit. Place top power unit on tank unit.
Twist top power unit until in drops into
place on tank unit. Flip up carrying handle to
lock units.
Aluminum Wands. Fit bottom wand section into top
aluminum wand section. [NOTE: Wands are identical
and interchangeable. Buttons must be on upper end
of wands for proper assembly. Aluminum wands fit
together snugly.] Latch button pops through hole to
lock sections together.
Floor Nozzle. Fit floor nozzle over bottom wand and
lock with latch button.
Grip/Trigger Unit. Fit grip/trigger unit into top
wand lock with latch button.
How to use this
Pay particular attention to the assembly diagram,
assembly instructions, and part names. Locate and
organize all parts before assembly. Familiarize
yourself with the parts and where they go. Following
the Guide will greatly enhance your ability to get
the most performance from your Big Green for
many years.

How to put it together

Ball Cage
Ball
Tank Unit
Top Power Unit
Motor Filter
guidelean carpet
Tip:
Several parts are
packed inside
the collection
tank/tank unit.
Separate tank
unit from top
power unit to
find these parts.
Also, match
the number
on the written
instructions to
the number on
the assembly
picture to better
understand each
assembly step.
4