IBM Computer Hardware User Manual page 13

Table 6 Memory allocation
Partition name
nicole_vio
oli
julia
Enabling ssh access to HMC
By default, the ssh server on the HMC is not enabled. The following steps
configure ssh access for node julia on HMC. The procedure will allow node julia
to run HMC commands without providing a password.
Enabling the remote command execution on HMC.
In the management area of the HMC main panel, select HMC Management →
HMC Configuration. In the right panel select Enable or Disable Remote
Command Execution and select Enable the remote command execution
using the ssh facility (see Figure 5).
Figure 5 Enabling remote command execution on HMC
The HMC provides firewall capabilities for each Ethernet interface. You can
access the firewall menu using the graphical interface of the HMC. In the
"Navigation Area" of the HMC main panel, select HMC Management →
Hardware Management Console (HMC) Case Configuration Study for LPAR Management
Memory (MB)
Min Desired
512 1024
1024 5120
512 1024
Max
2048
8192
8192
13