IBM Computer Hardware User Manual page 31

Figure 18 Selecting the days of the week for the schedule
5. Click on the Options tab and specify the details of the dynamic LPAR
operation as shown in Figure 19.
Figure 19 Specifying the details of the dynamic LPAR operation
Click on the Save button to activate the scheduler.
Note: By default, the time-out period for the dynamic LPAR operation is 5
minutes. In our test case, the memory reallocation was performed for 2GB of
RAM. When performing this operation, higher values might require a larger
time to complete.
Hardware Management Console (HMC) Case Configuration Study for LPAR Management
31