IBM 6826 Hardware Maintenance Manual page 79

POST Error Code
212XX
213XX
214XX
215XXXC, 215XXXD, 215XXXE, 215XXXU
If an external device, and power-on LED is
off, check external voltages
216XX
217XX
If an external device, and power-on LED is
off, check external voltages
218XX
Check for multi CD tray or jukebox
219XX
24201Y0, 24210Y0
Be sure wrap plug is attached
273XX
27501, 27503, 27506, 27507
27502, 27504, 27510, 27511, 27533, 27534,
27536, 27537
27509
27512
27535
27554
27555, 27556
27557
FRU/Action
1. SCSI Printer
2. Printer Cable
1. SCSI Processor
1. WORM Drive
1. CD-ROM Drive I
2. CD-ROM Drive II
Enhanced CD-ROM Drive II
Any CD-ROM Drive
3. SCSI Cable
4. SCSI Adapter or System Board
1. Scanner
1. Rewritable Optical Drive
2. SCSI Adapter or System Board
3. SCSI Cable
1. Changer
1. SCSI Communications Device
1. ISDN/2 Adapter
2. ISDN/2 Wrap Plug
3. ISDN/2 Communications Cable
1. 1 Mbps Micro Channel
2. Infrared LAN Adapter
1. ServerGuard Adapter
2. System Board
3. Riser card
1. ServerGuard Adapter
1. Remove redundant adapters, run Auto
Configuration program, then retest.
1. WMSELF.DGS diagnostics file is
missing
2. WMSELF.DGS diagnostics file is incorrect
1. 3V Lithium Backup Battery
2. ServerGuard Adapter
1. Internal Temperature out of range
2. ServerGuard Adapter
1. ServerGuard Adapter
2. Power Supply
1. 7.2V NiCad Main Battery Pack
2. ServerGuard Adapter
Chapter 7. Symptom-to-FRU Index
73