Installation Steps, Overview - Fujitsu PRIMERGY RX200 S7 Operating Manual

3

Installation steps, overview

This chapter contains an overview of the steps necessary to install your server.
Links take you to sections where you can find more detailed information about
the respective steps:
Ê First of all, carefully read the safety instructions in
page 35.
Ê Transport the server to the place where you want to set it up.
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section
Ê Make sure that you have all necessary manuals (see
overview" on page
Ê Components that have been ordered additionally may be delivered loose
with the server. For mounting refer to the original component documentation.
Ê Mount the server into the rack (see
the rack" on page
Ê Wire the server. Follow the instructions in sections
the server" on page 53
page 57.
Ê Connect the server to the mains (see section
mains" on page
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server (see section
RX200 S7
"Unpacking the server" on page
12); print out the PDF files if required.
51).
and "Notes on connecting/disconnecting cables" on
55).
"Controls and indicators" on page
Operating Manual
"Important information" on
"Installing/removing the server in/from
"Connecting devices to
"Connecting the server to the
50).
"Documentation
59).
33