Fujitsu PRIMERGY RX200 S7 Operating Manual page 67

LAN indicators
Figure 9: LAN indicators
No Indicator
1 LAN speed
2 LAN
link/transfer
I
Depending on the settings in the BIOS, the standard LAN connector 1
may also be used as a service LAN connector. You will find further
information in the "D3032 BIOS Setup Utility for PRIMERGY RX200 S7
Reference Manual".
RX200 S7
Description
Steady yellow signal in the event of a LAN transfer rate
of 1 Gbit/s
Steady green signal in the event of a LAN transfer rate
of 100 Mbit/s.
Remains dark in the event of a LAN transfer rate of
10 Mbit/s.
Steady green signal when a LAN connection exists.
Remains dark when no LAN connection exists.
Flashes green when LAN transfer takes place.
Operating Manual
Starting up and operation
67