Canon MP 700 Service Manual page 88

MultiPASS MP730/MP700 Chapter 4: Maintenance and Service
No. Tx or Rx
##789 [TX]
##790 [RX]
##791 [TX/RX]
##792 [RX]
##793 [RX]
##794 [TX]
##795 [TX/RX]
Definition
In ECM transmission, ERR was received after transmission of
EOR-EOP
In ECM reception, ERR was transmitted after reception of
EOR-Q
During an ECM mode procedure, a signal other than a
significant signal was received
In ECM reception, PPS-NULL between partial pages cannot be
detected
In ECM reception, no effective frame was detected while signals
were received at high speed, and a time-over condition occurred
Receive All 0 PPR during ECM Transmission
A fault occurred in decoding process during a communication
4-23