MultiPASS MP730/MP700 Chapter 4: Maintenance and Service
#8 CLEAR
TEL
USER SW
(Data initialization mode
settings)
SERVICE SW
NCU
SERVICE DATA
REPORT
COUNTER
ALL
MAIN:WLD-10-03
#9 ROM
030217 DB03 FFFF
(ROM management)
USB :05.12
CPU :WLD-01-01-CPU
021030 6511 FFFF
#10 CS SET
SERVICE REPORT
TEST MODE
If USER SW is selected from #8 CLEAR, the memory management of the user
data is not cleared. If TEL or SERVICE SW is selected, the memory
management of the user data is cleared.
NOTE
For details on test mode, see this Chapter 6.2 Service Test Functions
REFERENCE
Dialling data initialization
User data and service data #1 to #3
initialization
User data and service data #1 to #3 and
#6 to #7 initialization
#4 NCU setting data initialization
Data on system dump list initialization
Data on activity report initialization
Total number of pages printed/scanned
All user data, service data, activity
management data, and image data
initialization (except COUNTER)
Version No. and Checksum display
1.SERVICE & SYSTEM
2.SERVICE DATA
3.SYSTEM DUNP
Figure 4-18 Service Data 6
4-45