Hand Held Thermometer
CTH6500
GB
Measurement
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Temperature
Humidity
Flow
Pressure
Thermal flow probe m/s
Press [ENTER/MENUE] to confirm the reqused probe. Press
[ESC] to be back in the meauring mode.
12
Probe selection (Prob)
Pt100 (RTD)
Fe-CuNi Type J
NiCr-Ni Type K
Fe-CuNi Type L
NiCrSi-NiSi Type N
Pt13Rh-Pt Type R
Pt10Rh-Pt Type S
Cu-CuNi Type T
% rH
m/s
Pa
Please check the probe selection to be sure that
the correct probe is entered. If a measurement
value is changed with the ENTER-key at the
menu Prob, the standard calibration will be used
automatically.
Indication for combination probes
(temperature and humidity):
Please adjust relatively humidity as measurement
value for the channel with the combination probe
is plugged. If you want that the measured temper-
ature of the plugged combination probe is shown
as well, you have to deactivate the channel
on which no probe is plugged on (see chapter
"2.1.6 Channel activation [Chnl] (only 2-channel
instruments)).
WIKA Operating Instructions CTH6500
LCD-
Display