Windows Xp; Setting The Media; Ejecting The Media - IBM 73P4518 User Manual

Note: The message indicated above may differ depending on the versions of your
operating system. Refer to the instruction manual for your computer or operating
system for details.

Windows XP

1. Exit the program that uses the drive.
2. Confirm that the Write indicator of the drive is off.
3. Click the Remove icon on the tray.
4. Select removing drive. In this case, select the drive name assigned to the drive
5. The Safe to Remove Hardware confirmation window appears. Click the OK
6. Remove the plug of the USB cable from the USB terminal of the computer.
Note: The message indicated above may differ depending on the versions of your
operating system. Refer to the instruction manual for your computer or operating
system for details.

Setting the media

1. Press the eject button of the drive to open the top cover.
2. Place the media on the tray with the label face upward. Align the center hole of
3. Close the top cover gently and press the cover down until it is completely
4. When the top cover is correctly closed, the media is recognized and made

Ejecting the media

1. Press the eject button of the drive to automatically open the top cover.
2. Lift the edge of the disc carefully from the tray while pressing the upper
3. Close the top cover gently until the cover is completely closed. Check that the
5-2
IBM USB 2.0 CD-RW/DVD-ROM Drive: User's Guide
(D: in this figure).
button.
the disc with the clamp at the center of the tray and fit the disc in securely by
pressing the outer vicinity of the center hole.
locked.
usable after the busy indicator blinks for some seconds.
section of the clamp.
cover is securely locked.