Appendix A. Product Specifications - IBM 73P4518 User Manual

Appendix A. Product specifications

This appendix includes the following information:
v Physical specifications
v Power requirements
v Environmental requirements
v Read speeds
v Write speeds
Physical specifications:
The physical specifications
Power requirements:
The following table lists the power specifications by voltage level for the drive. The
power specifications are measured at the drive power connector and are nominal
values.
Environmental requirements:
1. Product-description data represents IBM's design objectives and is provided for comparative purposes; actual results might vary
based on a variety of factors. This product data does not constitute a warranty. Data is subject to change without notice.
© Copyright IBM Corp. 2004
Physical specification
Height
Width
Length
Weight
Power specifications Voltage
USB Standard Bus 5V dc
Power
Specification
Temperature (noncondensing) +5° C to +40° C
Relative humidity
(noncondensing)
1
of the drive are listed in the following table.
18.5 mm (0.73 in.)
130 mm (5.12 in.)
157 mm (6.18 in.)
305 g (0.67 lb.)
Average
800 mA
Operational
(+41° F to +104° F)
20% to 80%
Maximum
1.5 A
Nonoperational
-20° C to +55° C
(-4° F to +131° F)
15% to 85%
A-1