Table of Contents
Advertisement
6 Turntable
v
7 Lens
v
8 Lens protective sheet
v
9 USB Interface connector
v
10 Emergency eject lever
v
Operating Configurations
This section provides operating configurations for the Combo Drive .
1) For "Read Only" operations, use cable P/N 73P4522. Connect the drive to one
standard USB 2.0 port on the system.
2) For "Read/Write" operations, use USB "Y" cable P/N 73P4517. Connect the
drive to two standard USB 2.0 ports on the system.
Chapter 1. Combo Drive quick install
1-3
Advertisement
Table of Contents
