Enabling Dma For Windows Xp - IBM 48X Max User Manual

Enabling DMA for Windows XP

To change the DMA parameter setting from the Windows XP desktop, do the
following:
10. Select DMA if it is available.
11. Click OK.
C-2
IBM 48X/32X/48X/16X Max CD-RW/DVD-ROM Combination Drive: User's Guide
1. Click Start --> Control Panel.
2. Click Switch to classic view.
3. Double-click System.
4. Click the Hardware tab.
5. Click the Device Manager button.
6. Click on the IDE ATA/ATAPI controller to expand the tree.
7. Double-click on the controller that corresponds to where your CD-RW is
located (Primary IDE or Secondary IDE).
8. Click on the Advanced Settings tab.
9. Select the appropriate Transfer Mode pull-down that corresponds to the
CD-RW location, (Device 0 for Master, Device 1 for Slave).