Number Of Head Energizing Parts; Printable Area; Cutting Method; Receive Buffer - Epson TM-T88IV Technical Reference Manual

Number of Head Energizing Parts

For the TM-T88IV, the initial setting of the number of head energizing parts is "Auto
energizing." You can change the setting to a customized value (See
Switches" on page 43.); however it does not usually need to be changed.
Number of head energizing part

Printable Area

The printable area (left/right margins, print start position from the autocutting position, print
start position from the manual cutting position) of the TM-T88IV is the same as that of the
TM-T88III.

Cutting Method

The TM-T88IV uses the partial cutting method (cutting with one point in left edge left uncut) as
does the TM-T88III.

Receive Buffer

You can set the receive buffer of the TM-T88IV to 4KB or 45 bytes with DIP switch 1-2 as with the
TM-T88III. The buffer full condition and buffer full release condition of the TM-T88IV are the
same as those of the TM-T88III.

Memory Capacity

The sizes of the download buffer and NV graphics data of the TM-T88IV are the same as those of
the TM-T88III. The TM-T88IV does not have the NV user memory.
74
TM-T88IV
• One-part energizing
• Two-part energizing
• Four-part energizing
• Auto energizing
"Setting the Memory
TM-T88III
Fixed to two-part energizing