Customized Value
For the TM-T88IV, the customized value function is added. (See
on page
43.) With the customized value, you can perform the following settings:
• Print density
• Print speed
• Number of head energizing parts
• Single-color printing/two-color printing
• Black-color density in two-color printing
USB Interface
In addition to the USB interface boards that are available for the TM-T88III, the following ones
are available for the TM-T88IV.
• UB-U05
• UB-U06
• UB-U19
With one of the interface boards above, the USB controller on the main circuit board
operates for transmission.
USB Low Power Consumption Mode
With the TM-T88IV, you can enable the USB low power consumption mode with a DIP switch
setting. (See "For USB Interface" on page 40.)
What is the USB low power consumption mode?
You can reduce the power consumption when the printer is in the standby mode.
Maintenance Counter
For the TM-T88IV, a maintenance counter is added.
What is the maintenance counter?
With this function, printer information such as a number of lines printed, the number of
autocutting, and printer operation time after the printer starts working is automatically saved
in the printer memory. You can read the information with the Status API of the APD or
OPOS ADK to use it for periodical checks or part replacement.
Chapter 5 Replacement of
"Setting the Memory Switches"
5
81