For Usb Interface - Epson TM-T88IV Technical Reference Manual

For USB Interface

DIP switch bank 1
SW
1-1 Auto line feed
1-2 Receive buffer capacity
1-3 ∼
Undefined
1-7
Setting of USB power-saving
1-8
function
DIP switch bank 2
SW
2-1 Handshaking (BUSY condition)
Reser ved (Do not change
2-2
setting)
2-3 ∼
S e l e c t s p r i n t d e n s i t y / L ow
power consumption mode
2-4
Setting the release condition
of the receive buffer BUSY
2-5 state (This function is effective
when DIP switch 1-2 is set to
off.)
2-6 ∼
Reser ved (Do not change
setting)
2-7
Reser ved (Do not change
2-8
setting)
• For DIP switch 2-1 (BUSY condition), see also
• Do not change the setting of DIP switches 2-2, 2-6, and 2-7. Otherwise, the printer may
40
Function
Always enabled
Function
Receive buffer full
See
2-3/2-4)" on page
Releases the BUSY
s t a t e w h e n t h e
remaining capacity
o f
buffer reaches 138
bytes.
not operate normally.
ON
Always disabled
45 bytes
—
Disabled Enabled
ON
• Offline
• Receive buffer full
Fixed to OFF
"Selecting the Print Density (DIP Switch
41.
Releases the BUSY
s t a t e w h e n t h e
remaining capacity
t h e r e c e i ve o f t h e
buffer reaches 256
bytes.
Fixed to OFF
Fixed to ON
"Selecting the BUSY Status" on page
Factory
OFF
setting
OFF
4 KB OFF
— OFF
OFF
Factory
OFF
setting
OFF
OFF
OFF
OFF
r e c e i v e
OFF
ON
42.