Using The Magnetic Safety Key; Workout Programs - York PACER 3503 Instruction Manual

8. Key:
COOL COOL Interrupts the current workout and go directly into
DOWN DOWN
a four minute cool down routine.
9. Key:
SPEED SPEED
Increases the speed in increments of 4 KPH.
RAMP UP RAMP UP
10. Key:
PAUSE PAUSE
Slows the running mat to a complete stop.
STOP STOP

USING THE MAGNETIC SAFETY KEY

IMPORTANT: The treadmill will not work if the magnetic safety key is not in place. IMPORTANT: The treadmill will not work if the magnetic safety key is not in place.
Before starting the treadmill, attach the key to the computer, then attach the clip on the other end
to your clothing (above the waist). If this key is pulled out whilst you are running on the treadmill
then the mat will stop turning.
When the treadmill is not in use you should remove the safety key and store it somewhere
safe, away from the treadmill. This will prevent any unauthorised use of the treadmill.
Store the safety key in a safe place OUT OF REACH OF CHILDREN.

WORKOUT PROGRAMS

QUICK START
The default settings are 0% elevation and a speed of 1 Km/H. You may adjust the speed or
elevation any time during the workout.
1. Turn the power "ON".
2. Check the safety key and clip - Ensure the clip is secured to your clothing.
3. Press START for Quick Start and begin your workout.
* SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
OUT OF REACH OF CHILDREN.
*
PACER 3503 / 14