Strong Monaco 20 Owner's Manual page 9

ELECTRICAL - GENERAL INSTRUCTIONS FOR 110V USE ONLY
(MONACO 20, SEVILLE 22 & EL DORADO 22)
It is recommended that a licensed electrician install the power to your spa, in accordance with the National Electric Code
and/or any local electrical codes in effect at the time of installation.
Power supply installation must include a properly rated GFCI circuit breaker. The circuit must be dedicated and should
not be shared with any other appliances. It should be labeled and easily accessible to users. The power supply must be
hard wired into the power pack.
THREE WIRE
& GROUND
IF USING THE STANDARD 110V SERVICE, YOU MUST USE A DEDICATED LINE, WHICH
MEANS THAT THERE CAN NOT BE ANY OTHER HOUSEHOLD ITEMS CONNECTED TO
THE CIRCUIT OR OUTLET AT ALL! HAVING ANY OTHER ELECTRICAL APPLIANCES AT
ALL ON THIS CIRCUIT WHILE THE SPA IS RUNNING WILL TRIP THE BREAKER
IMMEDIATELY. DO NOT USE ANY TYPE OF EXTENSION CORDS BETWEEN THE SPA
AND THE WALL OUTLET, THIS WILL ALSO CAUSE THE BREAKER TO TRIP AND CAN
BE A POTENTIAL FIRE HAZARD.
110V
N
NEUTRAL
L1
HOT BLACK
L2
GRND
THESE WIRES GO
TO THE PC BOARD
CONTROL CIRCUIT
9