Honda CR-V Installation Instructions Manual page 4

12. Route the microphone jack through the hole you
just drilled, and secure the microphone in the
hole.
DRIVER'S
DASHBOARD
LOWER COVER
13. Attach the unit bracket to the security unit by
pushing the bracket into place. Do not push the
connector area.
UNIT BRACKET
4 of 6
MICROPHONE
MICROPHONE
JACK
SECURITY
UNIT
CONNECTOR AREA
(Do not push here.)
14. Remove and discard the mounting bolt, and
remove cruise control.
SECURITY
UNIT
GROUND
TERMINAL
GROUND BOLT
15. Align the security unit, the cruise control unit, the
ground terminal, and the mounting bracket on the
steering hanger beam. Install the new ground bolt
from the kit.
AII 27188 (0409)
STEERING HANGER
BEAM
BOLT
(Discard.)
© 2004 American Honda Motor Co., Inc - All Rights Reserved.
MOUNTING
BRACKET
CRUISE
CONTROL