Note
If the $PPF files have been serviced you will get the following prompt:
0
vmfppf 5654A09A *
copyfile 5654A09A $PPF a = = d (olddate replace
erase 5654A09A $PPF a
vmfbld ppf 5654A09A {ADSM | ADSMSFS} (status
1
Enter a 0 and complete the following steps
before you continue.
nnnnn
Note: If you've created your own PPF
override then use your PPF name instead of
5654A09A.
Use ADSM for installing on minidisks or
ADSMSFS for installing in Shared File System
directories.
Note: Do not use your own PPF name in
place of 5654A09A for the COPYFILE and
ERASE commands.
Re-issue VMFBLD to complete updating the
build status table.
Use ADSM for installing on minidisks or
ADSMSFS for installing in Shared File System
directories. When you receive the prompt that
was previously displayed, enter a 1 to
continue.
33
Service Instructions