Speaker Connection - Inter-m DPA-300S Operation Manual

Speaker Connection

Speaker Connection
Before connecting speakers to the unit, be sure to disconnect the
impedance is not less than the rated impedance indicated.
※ Caution: 1. Make sure that the total impedance does not equal or less than the rated impedance.
2. Do not connects a speaker has lower impedance than rated impedance, It may cause the
problem to unit.
3. Do not put the speaker cable close to input signal cable.
DP -300S/600S/900S/1200S, DP -300SO/600SO/900SO/1200SO
10W 10W
Speaker Output
300W
600W
900W
1200W
DIGIT L POWER MPLIFIER
C power cable. Make certain that the total
. . . .
10W 10W
Speaker Impedance
100V / 33.3
70V / 16.3
49V / 8
100V / 16.6
70V / 8.2
70V / 8
100V / 11.1
70V / 5.4
85V / 8
100V / 8.3
70V / 4.1
100V / 8
7