Speaker Connection - Inter-m DPA-300T Operation Manual

Speaker Connection

Speaker Connection
Before connecting speakers to the unit, be sure to disconnect the AC power cable. Make certain that the total
impedance is not less than the rated impedance indicated.
- 1CH, 2CH
....
10W
- 3CH, 4CH
....
10W
※ Caution: 1. Make sure that the total impedance does not equal or less than the rated impedance.
2. Do not connects a speaker has lower impedance than rated impedance, It may cause the
problem to unit.
3. Do not put the speaker cable close to input signal cable.
10W 10W 10W
10W 10W 10W
Speaker Output
300W
DPA-300T/300Q, DPA-300TO/300QO
DIGITAL POWER AMPLIFIER
OUTPUT
CH 4 CH 3 CH 2 CH 1
10W 10W
OUTPUT
CH 4 CH 3 CH 2 CH 1
10W 10W
Speaker Impedance
100V / 33.3Ω
70V / 16.3Ω
49V / 8Ω
. . . .
10W 10W
. . . .
10W 10W
7