HIKVISION Digital Video Recorder Quick Operation Manual page 13

Quick Operation Guide of Digital Video Recorder
1. In the live view window, select a playing window by clicking the mouse.
2. Double click a camera from the device list to start the live view.
3. You can click the
Refer to the following table for the description of buttons on the live view window:
Icon
/
/
/
/
/
Recording
Before you start
Make sure the device is connected with HDD or network disk, and the HDD or network disk has been initialized
for the first time to use.
Two recording types can be configured: Manual and Scheduled. The following section introduces the
configuration of scheduled recording.
Steps:
1. Click Remote Configuration> Camera Settings> Record Schedule to enter Record Schedule settings
interface.
2. Select the camera to configure the record schedule.
3. Check the checkbox of Enable Schedule to enable recording schedule.
button on the toolbar to start the live view of all cameras on the device list.
Description
Select the window-division mode
Start/Stop all live view
Capture pictures in the live view mode
Start/Stop all recording
Previous page
Next page
Open/Close audio
Start/Stop two-way Audio
Adjust volume
Enable/Disable digital zoom
12