Advertisement
Sys tem Con nec tions
Con trol Unit
The GP500 con trol unit must be in stalled as far away
as possible from the engine. Un der no cir cum stances
should the unit be in stalled close to hot or moving
parts.
1. Remove the seat and any side panels necessary to expose the
battery terminals, indicator light wiring and ignition wires.
2. Select a location under the seat to mount the GP500 control
unit. The control unit must be mounted in a flat and level
position with the side bearing the Clifford logo facing upward.
This location must stay dry and allow the use of screws or tie
wraps to securely fasten the control unit to metal. Avoid hot or
moving parts.
3. Mount the GP500 control unit using screws or tie wraps, but do
not permanently affix it until all wiring and testing is complete.
In stal la tion Man ual/499
3
Advertisement
