Advertisement
Ver ify that the trans mit ters are pro grammed cor rectly.
p
NOTE: If the 10- amp fuse blows upon arm ing:
Dis con nect the sys tem's two in di ca tor light wires, re place
p
the 10- amp fuse and re- arm. If the fuse does not blow, one
(or both) of the ve hi cle's in di ca tor light wires is short ing.
Find and cor rect the short(s), re con nect the in di ca tor light
wires, then re arm.
3. Disarm by pressing remote control button 1. The following
should occur:
The si ren chirps once.
The in di ca tor lights blink once.
The LED turns off.
The Im mo bi lization cir cuits im me di ate ly dis en gage (test this
by turn ing the key in the ig ni tion switch; the en gine should
crank, start and idle nor mally).
4. Test remote control range by standing approximately 20 feet from
the motorcycle and use the remote control to arm and disarm the
system.
The sys tem will re spond with the pre vi ously noted in di ca tions
for arm ing and dis arm ing. If not:
In stal la tion Man ual/499
23
Advertisement
