Table of Contents
Advertisement
D126_NTSC_PAL_E.book Page 23 Tuesday, January 15, 2008 12:15 PM
yourself in the picture when recording
with the self timer.
180°
Subject can monitor the LCD screen
NOTES
About the LCD and viewfinder screen: The
screens are produced using extremely
high-precision manufacturing techniques,
with more than 99.99% of the pixels
operating to specification. Less than
0.01% of the pixels may occasionally
misfire or appear as black, red, blue or
green dots. This has no effect on the
recorded image and does not constitute a
malfunction.
LCD Backlight
You can set the brightness of the LCD
screen to normal or bright.
DISP.
Hold
pressed down for more
than 2 seconds.
Repeat this action to toggle between
the normal and bright settings.
NOTES
• This setting does not affect the
brightness of the recording.
• Using the bright setting will shorten the
effective usage time of the battery pack.
Inserting and Removing a Disc
Use only 8 cm mini DVD discs marked
with the DVD-R
logo (including
DVD-R DL) or the DVD-RW
Refer also to Discs that have been
tested (
4).
Before inserting the disc be sure to
check that the recording surface is
clean. If necessary, use a soft lens-
cleaning cloth to remove any
fingerprints, dirt buildup or smudges
from the disc surface.
Inserting the Disc
Pick up lens
1
Turn the
switch to ON to
set the camcorder in
mode.
2
OPEN
Slide
fully in the direction of
the arrow and gently open the disc
cover completely until it stops.
Preparations
logo.
(
18)
• 23
Advertisement
Table of Contents
