Table of Contents
Advertisement
D126_NTSC_PAL_E.book Page 21 Tuesday, January 15, 2008 12:15 PM
First Time Settings
First Time Settings
Setting the Date and Time
You will need to set the date and time of
the camcorder before you can start
using it. The [DATE/TIME] screen will
appear automatically when the
camcorder's clock is not set.
When the [DATE/TIME] screen appears,
the year will be displayed in orange and
indicated with up/down arrows.
1
Change (
) the year and move
(
) to the month.
2
Change the rest of the fields
(month, day, hour and minutes) in
the same way.
3
Move (
) the cursor to the [OK]
button and press
clock and close the menu.
IMPORTANT
• When you do not use the camcorder for
about 3 months, the built-in
rechargeable lithium battery may
discharge completely and the date and
time setting may be lost. In such case,
recharge the built-in lithium battery
(
75) and set the time zone, date and
time again.
• The date appears in a year-month-day
format only in the first setup screen. In
subsequent screen displays the date
and time will appear as day-month-year
(for example, [1.JAN.2008 12:00 AM]).
You can change the date format (
• You can also change the date and time
later on (not during the initial setup). To
open the [DATE/TIME] screen, press
FUNC.
SETUP]
Changing the Language
Options
[
[DEUTSCH] [MELAYU]
[
[ENGLISH]
[ESPAÑOL]
[FRANÇAIS] [
[ITALIANO]
FUNC.
(
20)
FUNC.
[
[
[LANGUAGE
Desired language
to start the
FUNC.
NOTES
• If you changed the language by mistake,
follow the
item to change the setting.
• The display
menu screens refers to the name of
buttons on the camcorder and will not
change, regardless of the language
selected.
and select
[DATE/TIME
[DATE/TIME].
Default value
]
[MAGYAR]
[
]
[
]
]
[POLSKI]
[
ROMANA
[
]
[
[TÜRKÇE]
[
]
[
]
[
] [
]
MENU]
DISPLAY SETUP]
]
mark next to the menu
that appears in some
Preparations
66).
]
]
]
• 21
Advertisement
Table of Contents
