Table of Contents
Advertisement
D126_NTSC_PAL_E.book Page 32 Tuesday, January 15, 2008 12:15 PM
T
/
O PAUSE
STOP PLAYBACK
5 If the joystick guide does not
appear on screen, press
display it.
6 Push the joystick (
) toward
/
to pause the playback.
7 Push the joystick (
) toward
stop the playback and return to the
scene index screen.
NOTES
• Depending on the recording conditions,
you may notice brief stops in video or
sound playback between scenes.
• This camcorder can play back discs
recorded with this camcorder. Discs
recorded with other camcorders or discs
created with a computer may not play
back correctly.
• Be sure to finalize discs to play them
back on external DVD devices (
Special playback modes
Use the joystick guide to enter the special playback modes. There is no sound
during the special playback modes.
Special playback mode
Fast playback
Slow playback
End special playback mode
During some special playback modes, you may notice some anomalies (blocky
video artifacts, banding, etc.) in the playback picture.
32 •
Video
T
O ADJUST THE VOLUME
During the playback of a scene:
to
FUNC.
[
SPEAKER VOL.]
Adjust (
FUNC.
to
• The sound from the built-in speaker will
be muted when you close the LCD panel
or while the STV-250N Stereo Video
Cable is connected to the AV terminal.
• If you turn down the volume completely,
the icon will change to
45).
Initial mode
Camcorder operation
Normal playback
Push the joystick (
(
) toward
Perform operation again to increase playback
speed 5x → 15x the normal speed.
Playback pause
Push the joystick (
(
) toward
Perform operation again to increase playback
speed 1/8x → 1/4x the normal speed.
Special playback
Push the joystick (
) the volume
.
) toward
or
.
) toward
or
.
) toward
/
.
Advertisement
Table of Contents
