Table of Contents
Advertisement
D126_NTSC_PAL_E.book Page 48 Tuesday, January 15, 2008 12:15 PM
Photos
Refer to this chapter for details on shooting photos – from capturing
and playing back images to printing them.
Basic Recording
Basic Recording
Taking Photos
Before using a memory card for the
first time, be sure to initialize it with
this camcorder (
56).
1
Move the
/
switch to
images).
2
Turn the
switch to ON to set
the camcorder in CAMERA mode.
The red CAMERA indicator will turn
on.
48 •
Photos
3
Move the lens cover switch down
to
to open the lens cover.
4
Start/Stop
Press
• Once the focus is automatically
adjusted,
or more AF frames will appear.
• The CARD access indicator will
flash as the still image is being
recorded.
IMPORTANT
Observe the following precautions while
the card access display (
(
18)
screen, and when the CARD access
indicator is on or flashing. Failing to do so
may result in permanent data loss.
- Do not subject the camcorder to
vibrations or strong impacts.
- Do not open the memory card slot cover
and do not remove the memory card.
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the position of the
switch or the operating mode.
NOTES
If the subject is not suitable for autofocus,
turns yellow. Adjust the focus manually
(
38).
(still
.
will turn green and one
) appears on
/
Advertisement
Table of Contents
