Inserting And Removing A Disc - Canon DC410 Instruction Manual

- To allow the subject to monitor the
LCD screen while you use the
viewfinder.
- To include yourself in the picture when
recording with the self timer.
180 °
Subject can monitor the LCD screen
_ IOT£S
Abnnt the LCD and viewfinder screen: The
screens are produced using extremely
high-precision manufacturing techniques,
with more than 99.99% of the pixels
operating to specification. Less than
0.01% of the pixels may occasionally
misfire or appear as black, red, blue or
green dots. This has no effect on the
recorded image and does not constitute a
malfunction.
LCD Backight
You can set the brightness of the LCD
screen to normal or bright.
I !
I
i!¸i: i :;i
This setting does not affect the
brightness of the recordings.
Using the bright setting wil shorten the
effective usage time of the battery pack.
inserting and Removing a Disc
Use only 8 cm (3 in.) mini DVD discs
marked with the DVD-R _ logo
(including DVD-R DL) or the DVD-RW
logo. Refer also to Approved
discs (C_ 7).
Before inserting the disc, be sure to
check that the recording surface is
clean. If necessary, use a soft lens-
cleaning cloth to remove any
fingerprints, dirt buildup or smudges
from the disc surface.
inserting the Disc
....
!i!!I!iii !:! (EZ] 21)
®
Hold _S#i I pressed down for more
than 2 seconds.
Repeat this action to toggle between
the normal and bright settings.
Pick up lens
1 Move the ,B/_ switch to ,m
(movies).
2 Turn the | switch to ON to
set the camcorder in
mode.
Preparations• 25