Inserting And Removing A Disc - Canon DC410 Instruction Manual

- To allow the subject to monitor the
LCD screen while you use the
viewfinder.
- To include yourself in the picture when
recording with the self timer.
180°
Subject can monitor the LCD screen
NOTES
About the LCD and viewfinder screen: The
screens are produced using extremely
high-precision manufacturing techniques,
with more than 99.99% of the pixels
operating to specification. Less than
0.01% of the pixels may occasionally
misfire or appear as black, red, blue or
green dots. This has no effect on the
recorded image and does not constitute a
malfunction.
LCD Backlight
You can set the brightness of the LCD
screen to normal or bright.
DISP.
Hold pressed down for more
than 2 seconds.
Repeat this action to toggle between
the normal and bright settings.
Downloaded From VideoCamera-Manual.com Manuals
NOTES
• This setting does not affect the
brightness of the recordings.
• Using the bright setting will shorten the
effective usage time of the battery pack.

Inserting and Removing a Disc

Use only 8 cm mini DVD discs marked
with the DVD-R
DVD-R DL) or the DVD-RW
Refer also to Approved discs (
Before inserting the disc, be sure to
check that the recording surface is
clean. If necessary, use a soft lens-
cleaning cloth to remove any
fingerprints, dirt buildup or smudges
from the disc surface.
Inserting the Disc
Pick up lens
1
Move the /
(movies).
2
Turn the
set the camcorder in
mode.
logo (including
logo.
5).
( 19)
switch to
switch to ON to
• 23
Preparations