Inserting And Removing A Disc - Canon DC410 Instruction Manual

1.1
Inserting the Disc
I
(OJ
21)
Use only 8 cm (3 in.) mini DVD discs
marked with the DVD-R ~ logo
(including DVD-R DL) or the DVD-RW
~
logo. Refer also to Approved
discs (OJ 7).
Before inserting the disc, be sure to
check that the recording surface is
clean. If necessary, use a soft lens-
cleaning cloth to remove any
fingerprints, dirt buildup or smudges
from the disc surface.
• This setting does not affect the
brightness of the recordings.
• Using the bright setting will shorten the
effective usage time of the battery pack.
1
Move the
.~/Q
switch to
.~
(movies).
2
Turn the
liI'+lIiD
switch to ON to
set the camcorder in
t_Ui~i!IJ
mode.
Inserting and Removing a Disc
CD
NOTES
Subject can monitor the LCD screen
- To allow the subject to monitor the
LCD screen while you use the
viewfinder.
- To include yourself in the picture when
recording with the self timer.
You can set the brightness of the LCD
screen to normal or bright.
Hold
[DISP.]
pressed down for more
than 2 seconds.
Repeat this action to toggle between
the normal and bright settings.
About the
LCD
and viewfinder screen: The
screens are produced using extremely
high-precision manufacturing techniques,
with more than 99.99% of the pixels
operating to specification. Less than
0.01 % of the pixels may occasionally
misfire or appear as black, red, blue or
green dots. This has no effect on the
recorded image and does not constitute a
malfunction.
CD
NOTES
LCD Backlight
Preparations • 25