Inserting And Removing A Disc - Canon DC330 Instruction Manual

I I I I
• When you wish to include yourself in the
picture when recording with the self
timer.
• To allow the camcorder to be operated
with the wireless controller from the
front.
CD
NOTES
• This setting does not affect the
brightness of the recording.
• Using the bright setting will shorten the
effective usage time of the battery pack.
Inserting and Removing a Disc
I
(CD 22)
Use only 8 cm (3 in.) mini DVD discs
marked with the DVD-R ~ logo
(including DVD-R DL) or the DVD-RW
~
logo. Refer also to Discs that
h~wve
been tested
(OJ 6).
Before inserting the disc be sure to
check that the recording surface is
clean. If necessary, use a soft lens-
cleaning cloth to remove any
fingerprints, dirt buildup or smudges
from the disc surface.
Inserting the Disc
1
Turn the
!DiD
switch to ON to
set the camcorder in
(~t.1.~
••,,)
mode.
2
Slide
[OPEN
I
fully in the direction of
the arrow and gently open the disc
cover completely until it stops.
ICA\EiiAI .
Subject can monitor the LCD screen
You can set the brightness of the LCD
screen to normal or bright.
CD
NOTES
About the LCD and viewfinder screen: The
screens are produced using extremely
high-precision manufacturing techniques,
with more than 99.99% of the pixels
operating to specification. Less than
0.01 % of the pixels may occasionally
misfire or appear as black, red, blue or
green dots. This has no effect on the
recorded image and does not constitute a
malfunction.
Hold
I
DISP.]
pressed down for more
than 2 seconds.
Repeat this action to toggle between
the normal and bright settings.
LCD Backlight
Preparations • 27