Removing A Module Holder With Reader; Removing The Reader From The Module Holder - Fujitsu Celsius M720 Operating Manual

System expansions

Removing a module holder with reader

• Requirement: The casing is open (see
► Disconnect the cables connected to the module holder.
► Remove the screws (1).
► Slide the module holder out of the casing in the direction of the arrow (2).
► Remove the reader from the module holder (see
the module holder", Page
"Installing a module holder with reader", Page
or
► Remove the reader from the module holder (see
holder", Page
► Close the casing (see

Removing the reader from the module holder

1
42
42) and reinstall the module holder (corresponds to
42) and install the metal and plastic cover in the drive bay.
"Closing the casing", Page
1
"Opening the casing", Page
1
1
2
"Removing the reader from
41).
"Removing the reader from the module
35).
► Undo the screws (1).
► Pull the reader out of the module holder
in the direction of the arrow.
34).
Fujitsu Technology Solutions