Removing A Board - Fujitsu Celsius M720 Operating Manual

System expansions
► For PCI boards: Install the card holder on the front fan again (see
"Installing the front fan", Page
► Close the casing (see
If you have installed or removed a board, please check the relevant slot
settings in the BIOS Setup. If necessary, change the settings. Further
information is provided in the board documentation.

Removing a board

► Open the casing (see
Board
► Disconnect the cables connected to the board.
► For PCI boards: Remove the card holder on the front fan so that you can click the board
into place on the front fan (see
1
2
► Push the retaining clip (1) towards the slot cover to unlock it, then move
it towards back panel of the device.
► Pull the board out of the slot in the direction of the arrow (2).
► Place the board in suitable packaging.
60
48).
"Closing the casing", Page
"Opening the casing", Page
"Removing the front fan", Page
35).
34).
43).
Fujitsu Technology Solutions