1
2
► Push the retaining clip (1) towards the slot cover to unlock it, then move
it towards the back panel of the device.
► Pull the slot cover out of the slot in the direction of the arrow (2).
Do not throw away the slot cover. For cooling, protection against fire and in order to
comply with EMC regulations, you must refit the slot cover if you remove the board.
2
1
► Push the board into the slot (1).
► Swivel the retaining clamp back again until you feel it click into place (2).
► Connect the cables to the board.
► For display adapters with additional power supply: Attach the display adapter
power cable to the power supply.
Fujitsu Technology Solutions
System expansions
59