Safety Precautions - Kenwood DPX-MP4030 Instruction Manual

Safety precautions
(
To prevent injury or fire, take the
following precautions:
l
Insert the unit all the way in untrl it is fully
locked in place. Otherwise It may fall out of
place when jolted.
l
When extendrng the Ignition, battery, or
ground wires, make sure to use automotive-
grade wires or other wires with a 0.75mm'
(AWGI 8) or more to prevent wrre
deterioration and damage to the wire
coating.
l
To prevent a short circuit, never put or leave
any metallrc oblects (such as coins or metal
tools) inside the unit.
l
If the unit starts to emit smoke or strange
smells, turn off the power immediately and
consult your Kenwood dealer.
l
Make sure not to get your fingers caught
between the faceplate and the unit.
l
Be careful not to drop the unit or subject it to
strong shock.
The unit may break or crack because it
contains glass parts.
l
Do not touch the liquid crystal fluid if the
LCD is damaged or broken due to shock. The
liquid crystal fluid may be dangerous to your
health or even fatal.
If the liquid crystal fluid from the LCD
contacts your body or clothrng, wash it off
with soap immediately.
1 ACAUTION 1
To prevent damage to the machine,
take the following precautions:
l
Make sure to ground the unit to a negative
12V DC power supply.
l
Do not open the top or bottom covers of the
unit.
l
Do not install the unit in a spot exposed to
direct sunlight or excessive heat or humidity.
Also avoid places with too much dust or the
possibility of water splashing.
l
When replacing a fuse, only use a new one
with the prescribed rating. Using a fuse with
the wrong rating may cause your unit to
malfunction.
l
To prevent a short circuit when replacing a
fuse, first disconnect the wiring harness.
l
Do not use your own screws. Use only the
screws provided. If you use the wrong
screws, you could damage the unit.
IMPORTANT INFORMATION
About the disc changer/CD player to
be connected:
To connect a disc changer having the "O-N"
switch to this unit, set the "O-N" switch to "N".
Note that none of the KDC-CIOO, KDCC302,
C205, C705, and non-Kenwood CD changers
can be connected.
A
You can damage both your unrt and
the CD
changer if you connect them Incorrectly.
Precautions when connecting disc
changers/CD players released in 1997 or
earlier.
When you connect a model with no "O-N"
switch, the converter cord CA-DSI 00 avarlable
as an option may be required. For details,
consult your Kenwood dealer.
A disc changer doesn't work when it is
connected without using these options.
If a model with no "O-N" switch is connected,
some unavailable functions and information
that cannot be displayed are generated.
Do Not Load 3-in. CDs in the CD slot
If you try to load a 3 in. CD with its adapter
into the unit, the adapter might separate from
the CD and damage the unit.
Manufactured under license from Dolby
Laboratories.
"Do/by" and the double-D symbol are
trademarks of Dolby Laboratories.
-4-