Kenwood DPX-MP4030 Instruction Manual page 11

2 Select the item for adjustment
Press the [FM1 or [AMI button.
Each time the button is pressed, the items that can be adjusted
swatch as shown below.
Bass Extend "EXT"
Mrddle Center
Frequency "Mrd F"
3 Adjust the item
Press the I1rr1 or [))I] button.
Adjustment Item
Display
Bass Center Frequency
"Bas F"
Bass level
"Bas iv'
Bass 0 Factor
"Bas 0"
On/Off
0.5/l .0/l .5/2.0 kHz
Range
60/70/80/l 00
or 150 Hz
-12-+12dB
1.00/l .25/l .50/2.00
Middle level
"Mid Lv" -12-+12dB
Mrddle 0 Factor
"Mid 0"
1.0/2.0
Treble Center Frequency
"Tre F"
10.0/l 2.5/l 5.0/l 7.5 kHz
Treble level
"Tre Lv"
-12-+12dB
l
According to the Bass Q Factor setting value, the frequencies that
can be set K- Bass Center Frequency change as shown below
Bass Cl Factor Bass Center Frequency
1 00/l .25/l .50
60/70/80/l 00
2.00 60/70/80/l 50
l
When the Bass Extend IS set to ON, low frequency response IS
extended by 20%
The <Adjustment of Equalizer type at PRO> can be preset.
1
Refer to <Adjustment of Equalizer type at PRO> (page IO) to
adjust the Equalizer type.
2 Preset the adjusted value
Press the [#I 1 - [#31 button for at least 2 seconds.
Recalling a setting value
1
Enter the Equalizer Control mode
Press the [EQI button.
"EO PRO" IS displayed.
@
If "EQ EASY IS drsplayed, refer to <Equalrzer mode> (page 25) to
set the mode to ~EQ PRO"
2 Recall the setting value
Press the I#1 1 - [#31 button.
3 Adjust the Audio item
Press the
[I++
or [)H] button.
Adjustment Item
Display
Balance "BAL"
Fader
"FAD"
Non Fader Output
"N-F"
4 Exit the Audio Control mode
Press the [AUDI button.
1
Enter the Audio Control mode
Press the [AUDI button for at least 1 second.
"AUD mode" is drsplayed.
2 Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed, the items that can be adjusted
swrtch as shown below.
Range
Left 15 - Right 15
Rear 15 - Front 15
On/Off