Kenwood DPX-MP4030 Instruction Manual page 10

(page 2.5). Refer to <Adlustment of Equalizer type at tASY> (page
IO) or <Adlustment of Equalizer type at PRO> (page 10) for details
of adjustment
Press the [ATT] button.
Each time the button is pressed the Attenuator turns ON or OFF.
When it's ON, the "ATT" indicator blinks.
3 Exit the Equalizer Control mode
Press the [EQ] button for at least 1 second.
When operation stops for 10 seconds, the Equalizer type at that
time is registered and the Equalizer Control mode automatically
closes.
You can recall the best sound setting preset for different types of
the music.
1
Enter the Equalizer Control mode
Press the [EQ] button.
"EQ EASY" or "EQ PRO" is displayed.
2 Select the Equalizer type
Press the [EQ] button.
Each time the button is pressed, the Equalizer type switches as
shown below:
Equalizer type Display
Rock
"Rock"
Dance "Dance"
Jazz
"Jazz"
Pops "Pops"
Heavy
"Heavy"
Soft
"Soft"
Sharp
"Sharp"
Light
"Light"
Flat
"Flat"
@
l
"User" display: The values set on the <Adjustment of Equalizer
type at PRO> (page IO).
l
A selected Equalizer type can be adjusted.
Adjustment Items depend on the setting of <Equalizer mode>
- - II
Adjusting the effect of an Equalizer type selected in <Equalizer
Control> when <Equalizer mode> is "EASY".
1
Refer to <Equalizer Control> (page IO) to select the Equalizer
We.
2 Adjust the effect
Press the [FM1 or [AMI button.
Each time the button is pressed, the effects of Equalizer switch
as shown below:
Setting of effect Display
High "Hi"
Medium
"Mid"
Low "Lo"
Adjusting the effect of an Equalizer type selected in <Equalizer
Control> when <Equalizer mode> is "PRO".
1
Refer to <Equalizer Control> (page 10) to select the Equalizer
type.
I--