Kenwood DPX-MP4030 Instruction Manual page 14

General features
Selecting the Spectrum Analyzer display.
1
Enter the Spectrum Analyzer Select mode
Press the [S.Al button for at least 1 second.
"SPEANA" is displayed.
2 Select the Spectrum Analyzer
Press the [SAI button.
Each time the button is pressed, the Spectrum Analyzers swatch
as shown below:
Spectrum Analyzer
Scan of Spectrum Analyzer
Spectrum Analyzer 1 - 9
Sea Shore
Spectrum Analyzer Off
Display
"S.A Scan"
"SPEANA 1" - "SPEANA 9"
"Seashore"
"S.A Off"
@
Scan of Spectrum Analyzer:
The drsplay switches from SPEANA 1 to SPEANA 9 and
Sea Shore rn sequence.
3 Exit the Spectrum Analyzer Select mode
Press the [S.Al button for at least 1 second.
When operation stops for 10 seconds, Spectrum Analyzer at that
trme is registered and the Analyzer Select mode automatically
closes.
Press the [COLOR] button.
Each trme the button IS pressed, the lllumrnatron Color switches
as shown below,
Illumination Color Display
Scan of "Blue" to "Mint" "V.Color"
Blue
"Blue"
Mars Red "Mars Red"
Whrte "White"
Lavender
"Lavender'
Muscat "Muscat"
Pink
Sky Blue
"Pink"
"Sky Blue"
Lime
Violet
Aqua
Orange
Mint
User Color
"Lime"
"Violet"
"Aqua"
"Oranqe"
"Mint"
"R-X/G-X/B-X"
@
"User Color" enables the color set rn <User lllumrnation Color
Setting> (page 14) to be recalled.
3 Exit the Illumination Color Select mode
Press the [COLORI button for at least 1 second.
When operation stops for 10 seconds, the Illumination Color at
that time is registered and the Illumination Color Select mode
automatically closes.
Setting the color of the display.
1
Enter the Illumination Color Select mode
Press the [COLOR] button.
"Iliumi" is displayed.
2 Select the Illumination Color
The Illumination Color by the adjustment of RGB can arbitrarily
set.
1
Enter the Illumination Color Select mode
Press the [COLOR] button.