Table of Contents
Advertisement
Technical information
RTTE directive
This product is intended for use in
France for connection to the public
telephone network; it is compatible with
telephone switchboards.
This equipment complies with essential
requirements for radio equipment and
telecommunications terminals of the
1999/5/CE directive.
Connecting to a telephone
switchboard
This product is intended for use in
France for connection to the public
telephone network and compatible
switchboards, in tone or switched mode.
If in doubt, consult your service provider.
Inserting a pause
With some switchboards, after dialing
the access code, you may have to wait
38
several seconds before the switchboard
takes an outside line. A pause needs to
be defined in the dialing sequence.
Press and hold until the display shows
" P " to insert a pause before entering
the telephone number.
You may also need to define a pause
when storing international numbers or
card numbers.
Callback
You may need to use the callback
function if you are connected to a
switchboard / PABX. Contact your PABX
provider for more information.
Compliance with the regulations
in force
This phone complies with CE standards
in force:
Advertisement
Table of Contents
