Gold's Gym Crosswalk 570 User Manual page 19

HOW TO USE AN IFIT WORKOUT
To purchase iFit cards at any time, go to www.iFit.com
or call the telephone number on the front cover of this
manual. iFit cards are also available at select stores.
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
16.
2. Insert an iFit card and select a workout.
To use an iFit workout, insert an iFit card into the
iFit slot; make sure that the iFit card is oriented
so that the metal contacts are face-down and are
inserted into the iFit slot. When the iFit card is cor-
rectly inserted, the iFit logo will light up.
iFit Card
Next, select an iFit workout by pressing the iFit
increase and decrease buttons next to the iFit
slot. When an iFit workout is selected, the workout
duration, the maximum incline setting, the name,
and the maximum speed setting of the workout will
appear in the displays. In addition, a profile of the
speed settings of the workout will scroll across the
matrix.
Each iFit workout is divided into several one-min-
ute segments. One speed setting and one incline
setting are programmed for each segment.
Note: The same speed and/or incline setting may
be programmed for consecutive segments.
3. Start the walking belt.
Press the Go button or the Speed increase button
to start the workout. A moment after you press the
button, the treadmill will automatically adjust to the
first speed and incline settings of the workout. Hold
the handrails and begin walking.
iFit Slot
iFit Logo
During the workout, the voice of a personal trainer
will guide you through the workout.
If the speed or incline setting for the current seg-
ment is too high or too low, you can manually over-
ride the setting by pressing the Speed or Incline
buttons; however, when the next segment be-
gins, the treadmill will automatically adjust to
the speed and incline settings for the next
segment.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Go button
or the Speed increase button. The walking belt will
begin to move at 1 mph. When the next segment of
the workout begins, the treadmill will automatically
adjust to the speed and incline settings for the next
segment.
4. Monitor your progress with the displays.
See step 5 on page 17.
5. Measure your heart rate if desired.
See step 6 on page 17.
6. When you are finished exercising, remove the
key from the console.
See step 7 on page 17.
CAUTION: Always remove iFit cards from the
iFit slot when you are not using them.
THE COOL-DOWN MODE
To select the cool-down mode, press the Cool Down
button. The walking belt will begin to slow down incre-
mentally, once per minute for five minutes. The walk-
ing belt will then slow to a stop.
19