Gold's Gym Crosswalk 570 User Manual page 12

10. Attach the two Resistance Assemblies (54)
to the Uprights (75, 76) with four 1/4" x 4 1/2"
Screws (10), four 1/4" Flat Washers (11), and
four 3/8" Star Washers (5) as shown. Do not
overtighten the Screws.
Fully tighten the six 3/8" x 3 1/2" Screws (4)
(only one side is shown).
11. Identify the Left and Right Upper Body Arms
(100, 101). Remove and discard the two indi-
cated screws (A) from the Arms.
Make sure that the Left Upper Body Arm (100)
is positioned as shown. Insert the lower end of
the Arm into the large hole in the Resistance
Assembly (54). Insert an Upper Body Arm Insert
(55) into the lower end of the Left Upper Body
Arm. Then, tighten a #10 x 3/4" Screw (26) into
the Resistance Assembly. Do not overtighten
the Screw.
Attach the Right Upper Body Arm (101) as de-
scribed above.
10
54
5
75
10
11
11
26
A
100
101
12
76
10
11
55
54
26
A
54
5
4
55
54